3 Tests and Diagnostics
PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 3-7
Input the information one by one. (If you have not replaced the system board, the DMI
information should not be changed.)
・Model Name (e.g.
PORTEGE Z830)
・Version Number (e.g. XF82BFGCTL7AA21)
・Serial number (e.g. 7G121732H)
・Model Number (e.g. PRT10N-AAAA2)
・PCN/BND Number (e.g. PCN3384T0Z01FA1F/XXX)
The meaning of buttons at the bottom is as follows;
・Load DMI : reads out the current DMI information and display it.
・Write DMI : writes the DMI information input to this screen when pressed.
・Cancel : ends this program.
When Cancel button is pressed, the PC will restart. Press F12 and select the USB memory as
the boot device. Then this program will return to the test program screen.
To Next Page
Loading...
Need help?
General