dynabook PORTEGE X30W-J - Heatrun Test

3 Tests and Diagnostics
3-8 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
3.4 Heatrun Test
The Heatrun test is an automatic test program that executes the following tests successively.
1. Main Memory test
2. Sequential Read Test
3. V-RAM Memory test
To execute this test, select 2 from the test program menu (Top Menu), and press Enter.
Explanation of each test;
1. Main Memory test
Refer to Subtest 1 of 3.6 Memory Test
2. Sequential Read Test
Refer to Subtest 1 of 3.7 Hard disk/SSD Test
3. V-RAM Memory test
Refer to Subtest 2 of 3.6 Memory Test
To terminate the program, press SHIFT + Q.