3 Tests and Diagnostics
PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 3-9
3.5 Main Test Menu
To display the Main Test Menu, select 3 from the test program menu (Top Menu) and press
Enter. (The menu below shows an example of screen.)
Note: If you want to stop the test program under running temporarily, press SHIFT +
Q.
After the stop, pressing C continues the test and pressing E ends the test.
To return to the Top menu, move the cursor to EXIT to TOP Menu on the screen above
and press ENTER.
Others are the diagnostic tests. Move the cursor on the test item you want to execute and
press ENTER.
The following table shows the subtests names of each test.
Table 3-1 Subtest names (1/2)
TEST No TEST NAME SUBTEST No SUBTEST NAME
1 MEMORY 1
2
Main Memory Test
V-RAM Memory Test
To Next Page
Loading...
Need help?
General