3 Tests and Diagnostics
3-34
[CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
3.17 Sensor calibration tool
3.17.1 Outline
This tool should be needed to calibrate the sensors if the following change is applied to the
computer.
NOTE: Before implementing this tool, be sure to write the DMI information.
● Replacing of System board (FDIASY*), 3AXIS sensor board (FDIASE*) and Lid board
(FDIALS*)
● Replacing of the chassis or keyboard
● Disassembling/assembling of PC including removal and attachment of the sensor harness
● Replacing of the front Web camera
The following explains how to operate the tool.
To Next Page
Loading...
