dynabook PORTEGE X30W-J Maintenance Manual

3 Tests and Diagnostics
PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 3-1
3.1 Test program for maintenance
The test program for maintenance consists of the following items;
 Check and update of ME FW information
 Check of hardware information
 Check and update of BIOS information
 Check and update of EC/KBC information
 Diagnostic test programs
3.1.1 Check and update of ME FW information
The ME FW version is checked and if the update is needed, the message is displayed.
3.1.2 Check of hardware information
The information about hardware, such as HDD/SSD, memory and DMI, is displayed.
If no DMI information is registered, the message to request the DMI information registration
is displayed.
3.1.3 Check and update of BIOS information
The BIOS version is checked and if it is not the latest one, the message to confirm if update
is needed or not.
3.1.4 Check and update of EC/KBC information
The EC/KBC version is checked and if it is not the latest one, the message to confirm if
update is needed or not.
3.1.5 Diagnostic test programs
There are programs to write the HW information and to check the function of HW
components in the diagnostic test.
You will need the following equipment to perform some of the diagnostic test programs.

dynabook PORTEGE X30W-J Specifications

General

Brand	dynabook
Model	PORTEGE X30W-J
Category	Laptop
Language	English