3 Tests and Diagnostics
3-32
[CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Moving Within the SETUP Menu and Changing Values
1. Press and to move between the two columns. Press and to move between
items in a column.
2. Press either the Enter to change the value.
Accepting Changes and Exiting the SETUP Window
1. Press F10 to accept the changes you made.
2. To make other changes, press N. Repeat the steps above.
3. To accept the changes, press Y.
NOTE: You can press Esc to quit at any time without saving changes. SETUP asks you
to confirm that you do not want to save your changes. When SETUP is displayed
at the next time, the current configuration appears.
The Factory Preset Configuration
When you access SETUP, the current configuration is displayed.
1. To show the factory preset configuration, press F9.
2. To accept the default settings, press Y.
To Next Page
Loading...
