4 Replacement Procedures 4.7 5G/LTE MODULE
4-30 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
④ Fix the AUX, MIMO1 and MIMO2 cables
with the INSU.
① Connect the MIMO1 cable (white) to the
MIMO1 connector on the 5G module.
② Pass the MIMO1 cable (white) along to
the MIMO2 cable (black).
③ Stick the MIMO1 cable (white) to the
INSU. Make sure that the cables are not
overlapped.
Do not pass the cable on
the rib.
① Connect the MAIN cable (red) to the MAIN
connector on the 5G module.
② Pass the MAIN cable (red) along to the
MIMO1 cable (white) and pass it under the
System board corner.
③ Pass the MAIN cable (red) on the AUX,
MIMO2 and MIMO1 cables.
② Fix the cables with INSU KB LOW 5G.
① Fix the cables with INSU.
To Next Page
Loading...
