4 Replacement Procedures 4.12 SYSTEM BOARD
4-50 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Installing the SYSTEM BOARD
To install the SYSTEM BOARD, follow the steps below and refer to Figure 4-16 and 4-17.
NOTE: When replacing the SYSTEM BOARD with a new one, stick the INSU SQUARE
(321), COOL SHEET (H10), COOL SHEET (J10), SQUARE CUSHION (161),
INSU PCB SSD, INSU PCB PIPE L and INSU PCB PIPE R to the SYSTEM
BOARD in place.
To Next Page
Loading...
