4 Replacement Procedures 4.12 SYSTEM BOARD
4-52 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
NOTE: When replacing the INSU KB LOW or INSU KB LOW 5G with a new one, stick
new FIN CUSHION COVs to the INSU KB LOW or INSU KB LOW 5G in place
before setting the SYSTEM BOARD. (Please note that “INSU KB” in the
following pictures indicates INSU KB LOW or INSU KB LOW 5G.)
1. Set the SYSTEM BOARD to the COVER ASSY in place and secure it with the
following screws.
M24C S-THIN HEAD screw 2
2. Connect the REAR CAMERA FPC to the connector CN9560 on the SYSTEM
BOARD.
3. Connect the LCD HARNESS to the connector CN5390 on the SYSTEM BOARD
and fix it with the lock bar.
Rev.01
To Next Page
Loading...
