4.15 LID BOARD 4 Replacement Procedures
PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-63
Installing the LID BOARD
To install the LID BOARD, follow the steps below and refer to Figure 4-21.
NOTE: When replacing the LID BOARD with a new one, replace the D TAPE PCB LID
on the LID BOARD with a new one in place.
1. Connect the LID HARNESS to the connector CN3291 on the LID BOARD.
2. Set the LID BOARD to the guides of the COVER ASSY.
Prepare required parts in advance, when replacing the following items.
ITEM
Parts List
ITEM No
PART NAME
Quantity
Non
5G/LTE
LTE 5G
LID BOARD
82 LID BOARD 1 1 1
64 D TAPE PCB LID 1 1 1
Rev.01
To Next Page
Loading...
