4.19 LCD/CAMERA MODULE 4 Replacement Procedures
PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-79
11. Peel off the INSU SQUARE.
12. Release the lock bar and disconnect the LCD HARNESS from the connector on the
LCD UNIT.
13. Disconnect the TOUCH PANEL HARNESS from the connector on the TOUCH
PANEL.
14. Disconnect the SENSOR HARNESS from the connector CN9860 on the 3AXIS
SENSOR BOARD.
Figure 4-29 Removing the LCD (4)
Connector
CN9860
Lock bar
LCD HARNESS
INSU SQUARE
3AXIS SENSOR BOARD
TOUCH PANEL
HARNESS
SENSOR HARNESS
To Next Page
Loading...
