EasyManuals Logo

dynabook PORTEGE X30W-J Maintenance Manual

dynabook PORTEGE X30W-J
282 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #78 background imageLoading...
Page #78 background image
2 Troubleshooting Procedures
2-36
[CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Check 2 Make sure that WiGig antenna cable is firmly connected to the correct connector
on the WiGig module. If the cable is not connected properly, or connected to
another connector, connect it to the correct connector firmly and perform
Procedure 1. If the problem still occurs, go to the procedure 3.
2.14.3 Procedure 3 Replacement Check
WiGig module, WiGig antenna or system board may be faulty. Refer to Chapter 4,
Replacement Procedures, for instructions on how to disassemble the computer and then
perform the following checks:
Check 1 WiGig module may be faulty. Replace it with a new one. If the problem still occurs,
perform Check 2.
Check 2 WiGig antenna may be faulty. Replace it with a new one. If the problem still
occurs, perform Check 3.
Check 3 The system board may be faulty. Replace it with a new one.

Table of Contents

Other manuals for dynabook PORTEGE X30W-J

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the dynabook PORTEGE X30W-J and is the answer not in the manual?

dynabook PORTEGE X30W-J Specifications

General IconGeneral
Branddynabook
ModelPORTEGE X30W-J
CategoryLaptop
LanguageEnglish

Related product manuals