3 Tests and Diagnostics
3-4
[CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
When a system board is exchanged and DMI information is not written in, the
DMI information can be registered with this program.
Refer to 3.3 Entry of the DMI information for details.
Procedure 3: Check and update of BIOS information
The BIOS version is checked and if it is not the latest one, the message to
confirm if update is needed or not. The current version is displayed at upper
part of the display.
Does it update BIOS (Vx.xx->Vx.xx)? (Y or N), or press [Enter]
(Selection=Y)?
When the message above appears, pressing ENTER will start BIOS update.
Then, since the computer reboots automatically, repeat from Step 2.
If BIOS update is not needed, press N.
Procedure 4: Check and update of EC/KBC information
The EC/KBC version is checked and if it is not the latest one, the message to
confirm if update is needed or not. The current version is displayed at upper part
of the display.
Does it update EC/KBC (Vx.xx->Vx.xx)? (Y or N), or press [Enter]
(Selection=Y)?
When the message above appears, pressing ENTER will start EC/KBC update.
Then, since the computer reboots automatically, repeat from Step 2.
If the update is not needed, press N.
To Next Page
Loading...
Need help?
General