Dynamic DX2-REM550 User Manual

16 GBK60348: Issue 3
2.5.2 Accessory Mode – Standard
Accessory Modes are available:
 when the presence of that accessory is detected in the DX System;
 when the menu of that accessory has been enabled with its corresponding
menu enable parameter (see sections 4.2.1.7 to 4.2.1.9).
When the Accessory Mode button is pressed (either Next or Previous) the menu will
always start at the Seating Accessory screen (if actuators are active).
Mode
Active
Parameter(s)
Actuators
Depends on enabled
actuators
iPortal2
Set ‘Allow non-driving
profile’ to ‘Yes’. See
DSM section 5.3.8.4
Allow Non-Driving
Profile
Lights
Lighting Menu (0)
ECU 1
Mouse
ECU Menu (4.2.1.9)
ECU 2
ECU Menu (4.2.1.9)
Program
Screen
Settings
OBP Menu (4.2.1.7)
Active Accessory
(Actuator Mode shown)
Next
Accessory
Mode
Previous
Accessory
Mode
Accessory Mode Menu
Map
OBP
Lights
ECU1
iPortal2
The operation of
the keypad and
the joystick is
dependent on
the currently
selected
Accessory Mode.
Accessory
Modes that are
not available are
not shown in the
accessory list.
Drive
Act
ECU 2

Dynamic DX2-REM550 Specifications

General

Brand	Dynamic
Model	DX2-REM550
Category	Video Game Controller
Language	English