20 GBK60348: Issue 3
2.5.4 Actuator Mode – Standard
DX2 Mode (for the DX2 Actuator Modules)
You can assign any of the icons listed above to a programmed Actuator Function/Profile by
setting the Input Function Number parameter of that Actuator Profile accordingly.
For example, if an Actuator Profile has Input Function Number 28, the lie down icon will be
shown for that Actuator Profile. Only the icons that have been assigned to an Actuator
Profile are shown in the menu, if the Actuator Module that contains this Actuator Profile is
actually detected in the system.
Accessory
The function keys scroll through
the available actuator functions.
Rotate the orientation of
the joystick with Accessory
Menu Navigation (4.2.1.6).
To Next Page
Loading...
Need help?
General
