Dynamic DX2-REM550

28 GBK60348: Issue 3
2.6.4 On-Board Programming (OBP) Mode – 4Q
The OBP menu is available when OBP Menu (see 4.2.1.7) has the value 'Yes'.
OBP Menu Items
Menu Item
Icon
Menu Item
Icon
Screen Brightness
Clock adjustment
Screen Environment
(inside/outside)
Clock visible (yes/no)
OBP Mode starts at the OBP Home Level (see 2.6).
 Deflect the joystick forward to enter the OBP Item Selection Mode
Item Selection Mode will start up with the item that was last
selected.
 To select the desired menu item, deflect the joystick to the right. Alternatively, the
function buttons (I/II) can also be used to scroll through the available menu items.
 To activate the selected menu item, deflect the joystick forward.
Note:
The orientation of the joystick depends on the value of the Accessory
Menu Navigation (4.2.1.6) parameter.
The description of the OBP menu assumes that this parameter is set to
‘Normal’.
Clock
In/Out
R
R
R
Bright
Fwd*
Fwd*
R
Left/Rev
Fwd*
4Q OBP Mode Menu Map
Previous
Mode
Next
Mode
Item Selection Mode*
Drive Mode
Home
Level
Next
Item
Activate Item
Home Level
*Item Selection Mode will show the last selected Item
Item Selection
Home Level
Home
Visible
Fwd*