26 GBK60348: Issue 3
2.6.1 Drive Mode – 4Q
Drive Mode starts at the Drive Home Level (see 2.6).
Deflect the joystick forward to enter the Drive Profile Selection Mode.
In Drive Profile Selection Mode the Drive Profile flashes.
Select the desired Drive Profile by deflecting the joystick left/right.
Deflect the joystick forward to enter Drive Mode*.
In Drive Mode the speedometer appears.
Deflect the joystick to drive.
Use the plus/minus buttons to change the Drive Profile.
To exit Drive Mode:
If Reverse Escape Enable (4.2.1.16) has the value 'yes': deflect the joystick reverse
to return to the Drive Home Level.
Wait for Escape Timeout (4.2.1.17) seconds and the menu will automatically return
to the Drive Home Level.
Press the up/down button to return to the Home Level of the next/previous Mode.
Reverse / Exit to Home Level**
* If the selected Drive Profile does not have Joystick Only Operation set to 'Yes', entering
Drive Mode will automatically exit 4Q Mode
** Depending on the value of the Reverse Escape Enable parameter
*** Depending on the value of the Escape Timeout parameter