Dynamic DX2-REM550

GBK60348: Issue 3 9
2.2 The Screen
2.2.1 Screen Layout
The screen layout varies depending on the selected mode – Drive Mode (left-hand
screen above), and Accessory Mode (right-hand screen above).
The area at the centre of the screen shows the mode that is currently active.
2.2.2 The Status Bar
The status bar is located at the top of the screen. The status bar shows the operating
mode (standard or 4Q), the lighting icons, the System Status and the clock.
Operating
Mode
Left Indicator
Active
Right
Indicator
Active
Clock
Side Light
Active
System Status
Hazard Lights Active