48 GBK60348: Issue 3
o DX-SNP secondary remote
Non DX2 Power Modules:
o Non DX2 Power Modules such as DX-GB will perform an Auto-Download
from the Master Remote
Non DX2 Master Remotes:
o If a non-DX2 Master Remote is replaced, the values stored on the NEW
Master Remote will overwrite the values stored in other modules. After
replacement the chair MUST be re-programmed using the Wizard or HHP.
o If the replacement remote has been pre-programmed by the OEM then
the system may not need reprogramming.