167
REV30 8.4.15 TT4-8 4TNV98
FRONT END ALIGNMENT PROCEDURE
+ 1/16 TOE OUT
FRONT TIRES
Find center line of tire front and back
Check with tape measure to see difference
The front should be 1/16 inch more that the rear
1/16 inch toe out, if less or greater loosen the two bolts on the tie rod clamp
Turn clamp in or out to achieve desired setting—1/16 in toe out
Retighten two bolts on the tie rod clamp
TIE ROD CLAMP & BOLT
MAINTENANCE
To Next Page
Loading...
