EASYPRINT Compact 53C - Connecting Encoder to I;O Connector (Instead of Encoder Connector)

DESCRIPTION AND INSTALLATION
2-30 25364 Issue 8 March 2018
Connecting Encoder to I/O Connector
(Instead of Encoder Connector)
The encoder can be connected to Input 1 of the I/O Connector which
duplicates the encoder connector.
(1) Ensure printer supplies +5VDC on pin 9 see “Output Voltage” on page
2-22
(2) Connect:
Pin 15 (Red / White) to Pin 3 (Blue) of Encoder (0V)
Pin 8 (Purple) to Pin 2 (White) of Encoder (Signal)
Pin 9 (Grey) to Pin 1 (Red) of Encoder (+5V)