Eaton BladeUPS - UPS Operation and Controls; Control Panel and Display Functions

Eaton BladeUPS 5 kVA to 60 kVA (N+1) User’s Guide 164201649—Rev 14 95
CChhaapptteerr 55 OOppeerraattiioonn
55..11 OOppeerraattiioonn
This chapter contains information for operating the BladeUPS module, including:
• Control panel operation
• Operating modes
• UPS startup and shutdown
• Transferring the UPS between modes
• Setting the power strategy
• Configuring the UPS for battery settings
55..22 CCoonnttrrooll PPaanneell FFuunnccttiioonnss
The UPS has a four-button graphical LCD with backlight. It provides UPS load status, events, measurements,
current settings, and other useful information. ( See Figure 72 )
Figure 72. BladeUPS Module Control Panel
Power On Indicator (green)
On Battery Indicator (yellow)
Bypass Indicator (yellow)
Alarm Indicator (red)
Control Buttons
for the LCD Menu Options
The Mimic screen shows the internal components of the UPS and a real-time display of the operating status. (
See Figure 73). A thicker bar indicates the node is energized.
Figure 73. BladeUPS Module Mimic Screen
Rectifier/
Charger
Inverter
Bypass
Battery
Output Power Percentage
Battery Charge Remaining
(or Battery is Charging)