Eaton BladeUPS 5 kVA to 60 kVA (N+1) User’s Guide 164201649—Rev 14 31
Figure 12. BladeUPS Module Rear Panel
Load
(RPM) Connector
Breaker
Input
Breaker
Battery
Breaker
2. To remove the upper side panels from the cabinet (see Figure 13 ):
• At the top of the cabinet, unlock the upper side panels with the key
• Remove the left and right upper side panels and set them aside.
• Secure the key so it will be available when you are ready to replace the upper side panels.
Top Entry Installation
To Next Page
Loading...
