34 Eaton BladeUPS 5 kVA to 60 kVA (N+1) User’s Guide 164201649—Rev 14
Figure 15. Removing the Cabinet Top Panel Screws
1/8”
Front Interior View Back Interior View
Overhead View
Front
Screws
Back
Screws
NOTE Use an extension bar on the socket wrench or screwdriver if you need to reach the
screws. You may also need to use a step ladder. Use safety best practices when
standing on a ladder.
5. With the back doors open, reach up inside the rack and push up the cabinet top panel to lift it off of the
loosened bolts. Retain the panel (see Figure 16 ).
Top Entry Installation
To Next Page
Loading...
