2019.04.4
© 2018 Eaton Cummins Automated Transmission Technologies. All rights reserved
69
TRSM0950 Removal | Main Shaft and Countershaft Removal
14. Remove Lower Countershaft Snap Ring and Flat
Washer.
NOTICE: A new snap ring is required when reinstalling.
15. Perform “Rear Housing Assembly Removal” on
page 51.
16. Perform “Main Housing Removal” on page 59.
17. Remove the Upper Lube Tube 8 mm cap screw.
18. Remove the Upper Lube Tube.
19. Remove the Lower Lube Tube 8 mm cap screw.
20. Remove the Lower Lube Tube.
To Next Page
Loading...
