78
© 2018 Eaton Cummins Automated Transmission Technologies. All rights reserved
2019.04.4
Inertia Brake Disassembly/Assembly | Disassembly/Assembly TRSM0950
Procedure – Disassembly
1. Remove the clutch pack from the Inertia Brake Hous-
ing.
2. Remove the 2 wear guides from the Inertia Brake
Housing.
3. Remove O-ring from the front of the Inertia Brake
Housing.
4. Remove O-ring from the rear of the Inertia Brake Hous-
ing.
To Next Page
Loading...
