Eaton Power Xpert 9395P - Meters Summary Screen; Input Meters Screen; Figure 7-12. Typical Command Confirmation Screen (Charger Off); Figure 7-13. Meters Summary Screen

P-164000476 9395P 500kVA / 600 kVA 91
Revision 002 User’s and Installation Guide
Figure 7-12. Typical Command Confirmation Screen (Charger Off)
7.3.7 Meters Summary Screen
The following figure shows the Meters Summary screen. This screen allows selection of the various
metering readout functions of Input, Output and overall System status.
The three left items in the OVERVIEW section of the screen are not active buttons but are status detail
panels. They show individual conditions of the UPS at that time.
The two items at the far right of the OVERVIEW section are active buttons. They can be selected to
show a profile of efficiency or consumption over various time periods of 24 hours, 7 days, 30 days, or 1
year. This is true of all the meters screens listed in the top section.
Number 1) in the following figure refers to Figure “Average Efficiency Screen from Home Screen”.
Number 2) refers to Figure “Consumption Screen from Home Screen”.
Figure 7-13. Meters Summary Screen
7.3.8 Input Meters Screen
The following figure shows the Input Meters screen. This screen displays the individual phase and total
power values of the system.
1
2