Eaton Power Xpert 9395P - Using the Color Touchscreen Control Panel; Status Indicators; Figure 7-3. UPS Color Touch Screen Control Panel (Typical)

P-164000476 9395P 500kVA / 600 kVA 85
Revision 002 User’s and Installation Guide
7.3 Using the Color Touchscreen Control Panel
The following sections describe the UPS control panel and how to monitor and control UPS operation.
Figure 7-3. UPS Color Touch screen Control Panel (Typical)
The color touchscreen control panel consists of:
• A color liquid crystal touch screen display (1)
• A horizontal row of LED indicators (2)
Before system power up, the panel displays a system status screen similar to the one shown in the
figure above.
When the unit powers up, the screen displays as shown in the figure above. When power is applied to
the system, the display advances to the Sign In screen shown in Figure “Parts of the Touch Screen”.
7.3.1 Status Indicators
The symbols on the bottom of the control panel are status indicators. These colored light emitting
diode (LED) lamps work with the alarm horn to let you know the operating status of the UPS. See the
table below.
1
2