Eaton Power Xpert 9395P - Figure 4-4. Conduit and Wire Entry Locations

P-164000476 9395P 500kVA / 600 kVA 35
Revision 002 User’s and Installation Guide
Figure 4-4. Conduit and wire entry locations
1 Exhaust grill debris shield (Remove covering before operating system.)
2 Top entry conduit landing for AC input and output, and DC input (Remove panel to
drill or punch cable entry holes.)
3 Interface entry for TB1 through TB3 wiring and X-Slot connections (Remove panels
to drill or punch cable entry holes.)
4 Bottom entry conduit landing for AC input and output, and DC input (remove
panel to drill or punch cable entry holes.)
1
2
3
4