Eaton Power Xpert 9395P - Using this Manual; Conventions Used in this Manual; Symbols, Controls, and Indicators

P-164000476 9395P 500kVA / 600 kVA 6
Revision 002 User’s and Installation Guide
1.4 Using this manual
This manual describes how to install and operate the Eaton 9395P 500 kVA / 600 kVA cabinet. Read
and understand the procedures described in this manual to ensure trouble-free installation and
operation. In particular, be thoroughly familiar with the REPO procedure (see Section “Using the
Remote Emergency Power-off Switch” on page 124).
The information in this manual is divided into sections and chapters. The system, options, and
accessories being installed dictate which parts of this manual should be read. At a minimum, Chapters
1 through 4 and Chapter 7 should be examined.
Read through each procedure before beginning the procedure. Perform only those procedures that
apply to the UPS system being installed or operated.
1.5 Conventions used in this manual
This manual uses these type conventions:
• Bold type highlights important concepts in discussions, key terms in procedures, and menu
options, or represents a command or option that you type or enter at a prompt.
• Italic type highlights notes and new terms where they are defined.
• Screen type represents information that appears on the screen or LCD.
In this manual, the term UPS refers only to the UPS cabinet and its internal elements.
The term UPS system refers to the entire power protection system – the UPS cabinet, the battery
cabinet, and options or accessories installed.
1.6 Symbols, controls, and indicators
The following are examples of symbols used on the UPS or accessories to alert you to important
information:
Icon Description
Information notes call attention to important features or instructions.
[Keys] Brackets are used when referring to a specific key, such as [Enter] or [Ctrl].