Eaton PowerXL DH1 - Table 164. Instance 127 (Input). EIP Drive Status Length = 20 Bytes

134
Hardware specifi cation
POWERXL SERIES VFD MN040010EN—June 2018 www.eaton.com
Assembly instance 127
Table 164. Instance 127 (Input). EIP Drive status length = 20 bytes
ByteBit 7Bit 6Bit 5Bit 4Bit 3Bit 2Bit 1Bit 0
0 CtrlFromNet At Zero Speed At Reference Alarm/Warning Faulted Direction Running Ready
1NA
2 % Speed Actual (Low Byte)

3 % Speed Actual (High Byte)

4 ProcessDataOut1 (LowByte)
5 ProcessDataOut1 (HighByte)
6 ProcessDataOut2 (LowByte)
7 ProcessDataOut2 (HighByte)
8 ProcessDataOut3 (LowByte)
9 ProcessDataOut3 (HighByte)
10 ProcessDataOut4 (LowByte)
11 ProcessDataOut4 (HighByte)
12 ProcessDataOut5 (LowByte)
13 ProcessDataOut5 (HighByte)
14 ProcessDataOut6 (LowByte)
15 ProcessDataOut6 (HighByte)
16 ProcessDataOut7 (LowByte)
17 ProcessDataOut7 (HighByte)
18 ProcessDataOut8 (LowByte)
19 ProcessDataOut8 (HighByte)

This is the actual value from the frequency converter. The value is between 0 and 10000.
In the application, the value is scaled in percentage of frequency area between set
minimum and maximum frequency. (0 = 0.00%–10000 = 100.00%).
ote: N See Appendix B for Process Data Value defaults.