Eaton PowerXL DH1 - Table 203. Analog Input Object Instance Summary; Table 204. Multi State Object Instance Summary

177
Commissioning
POWERXL SERIES VFD MN040010EN—June 2018 www.eaton.com
Analog input object instance summary
The following table summarizes the Analog Input Objects supported.
Table 203. Analog input object instance summary
Instance
ID Object name Description Units
Preset
value access
AI0
Frequency Setpoint Frequency Setpoint Hz R
AI1
Output Frequency Output Frequency Hz R
AI2
Motor Speed Motor Speed Rpm R
AI3
Motor Load Motor Load Percent R
AI4
Kilowatt Hours total Kilowatt Hour Counter (Total) scaled by 1000 KWh R
AI5
Motor Current Motor Current Amps R
AI6
DC link Voltage DC link Voltage Volts R
AI7
Motor Voltage Motor Voltage Volts R
AI8
Unit Temperature Heatsink Temperature °C R
AI9
Motor Torque In % of motor nominal Torque Percent R
AI10
Operating Days Operating Days (resettable) Day R
AI11
Operating Hours Operating Hours (resettable) Hour R
AI12
Motor Temperature Motor Temperature Percent R
AI13
Analog Input 1 Analog Input 1 Volts R
AI14
Analog Input 2 Analog Input 2 Volts R
AI15
Analog Output 1 Analog Output 1 Volts R
AI16
Analog Output 2 Analog Output 2 Volts R
AI17
Kilowatt Instantaneous Kilowatt Instantaneous kW R
AI18
Process Data Out 1 Fieldbus Process Data Out 1 N/A R
AI19
Process Data Out 2 Fieldbus Process Data Out 2 N/A R
AI20
Process Data Out 3 Fieldbus Process Data Out 3 N/A R
AI21
Process Data Out 4 Fieldbus Process Data Out 4 N/A R
AI22
Process Data Out 5 Fieldbus Process Data Out 5 N/A R
AI23
Process Data Out 6 Fieldbus Process Data Out 6 N/A R
AI24
Process Data Out 7 Fieldbus Process Data Out 7 N/A R
AI25
Process Data Out 8 Fieldbus Process Data Out 8 N/A R
ote: N For Present Value Access Types, R = Read-only.
Commandable values support priority arrays and relinquish defaults.
Multi state object instance summary
The following table summarizes the Multi State Objects supported.
Table 204. Multi state object instance summary
Instance
ID Object name Description State text
Preset
value access
MV0
Control Mode Indicates the Drive Control Mode - Local, Remote or OFF 0 = Local(Hand) /
1 = Remote /
2 = OFF
R
MV1
Active Fault Code Indicates the Latest Active Fault Code of the Drive State Text w.r.t the
Active Fault Code
R
ote: N For Present Value Access Types, R = Read-only.
Commandable values support priority arrays and relinquish defaults.