137
Hardware specifi cation
POWERXL SERIES VFD MN040010EN—June 2018 www.eaton.com
Reset service
The following table lists the different types of resets
supported by the identity object.
Resetting the drive interface to its out-of-box
configuration will change the response of the drive to a loss
of communications with the drive. The devices will have
to be re-configured for your application before resuming
normal operation.
Table 168. Reset service
Value Reset description
0 Initializes drive to the Power-up state. (Soft reset)
1 Writes default values to all instance attributes then saves all non-volatile attributes to
FLASH memory and then performs the equivalent of a Reset (0). (Factory Reset)
Common industrial objects implemented by PowerXL DG1 DeviceNet
CIP common required objects
Identity object, class 0x01
This object provides identification of and general information about the drive.
Table 169. Identity Object, Class 0x01
Object descriptions
Class attributes
ID Description NV Data type Access rule Remarks/Default
01h Revision NV UINT Get 1
Class services
ID Service
0Eh Get_attribute_single
Instance attribute
ID Description NV Data type Access rule
01h Vendor ID NV UINT Get 68 (Eaton Vendor ID)
02h Device Type NV UINT Get 2 (AC Drive)
03h Product Code NV UINT Get 0x3019
04h Revision NV Struct of: Get
Major Revision USINT
Minor Revision USINT As Device Version
05h Status V WORD Get Refer Table 168
06h Serial Number NV UDINT Get Runtime = 0
07h Product Name NV SHORT_STRING Get PowerXL VFD DeviceNET
Comm. Card
Instance services
ID Service
Id Service
0Eh Get_attribute_single
05h Reset 0, 1
To Next Page
Loading...
