Eaton PowerXL DH1 - Page 180

156
SmartWire-DT External Communication Cards
POWERXL SERIES VFD MN040010EN—June 2018 www.eaton.com
Code Parameter Min. Max. Unit Default ID Note
BX.2.4Parameter Access01
1 PNU927 specifies the Operation
priority of parameters for Acyclic
communication
0 = No permission of ProfiBus
Cyclic communication
1 = ProfiBus has Cyclic
communication priority
BX.2.5 Process Data Access 0 5 4 PNU928 specifies the control
priority of the device for Cyclic
communication
1=Fieldbus;
2=NET Control, Local Ref;
4=NET, Local on Fault;
5=NET & Local CMD;
BX.2.6 Fault Situation Counter 0
BX.2.7 Parameter Sets 0 7 0
Table 188. SmartWire-DT parameters, continued