P.16
PM10U
EBARA
CORPORATION
available as group output.
2.3 The Way of Pump Moving
2.3.1 Preparation
Before pump moving, all adjuster feet shall be raised fully at four places.
In case of being not raised fully, pump may be tripped over by obstacle on floor.
2.3.2 Moving Method
Move pump slowly by pushing eye bolt toward direction A. be sure not to be caught by toes. If pump
needs to moved toward direction B in order to be set at a corner or narrow spaces, two persons shall
move the pump by pushing its terminal portion alternately as directed below.
If pump needs to be moved on steps or ditches, spread steel plate or the like which can sustain the
pump weight over the steps / ditches and pump shall be moved on it by two persons with care.
If pump should lose its balance when moving and start tripping over, never try to sustain the pump,
get away from the pump immediately.
A
AA
A
Caster Adjuster
To Next Page
Loading...
