P.14
PM10U
EBARA
CORPORATION
1. Acceptance Check
Check the following items on receipt of the pump package.
Check that the nameplate affixed to the outer cover of the pump to confirm that the pump supplied
agrees with your order. Check the accessories against the packing list and the previously
submitted drawings and documents to confirm that the all ordered accessories have been
supplied.
Check that no damage for the pump has occurred in transit.
Store the pump in a dry and clean place if it is not installed at once after delivery.
Temperature : 5 to 40 deg C
Humidity : 80% or less
NOTE
Notify EBARA without delay when damage is discovered or when components are
missing. Do not use when a leak is present as this will result in accident.
NOTE
Pump must be placed in an upright position. Do not stack as packing. When the pump
was overturned, this will result in accident.
To Next Page
Loading...
