2 Menu 2 - Overview and monitoring of the system (read-only!)
This button is used to call up the submenu for the system overview and the most important
information (name, position, address) and the status. In the submenu, the most important status (e.g. display of
the current operating and temperature statuses of the individual refrigeration points, pack controllers etc.) can
be viewed (not configured) using the remote control for each E*LDS component..
The submenu contains the following buttons, here the buttons 1..8 in the first menu screen:
Buttons 9..10 in the second menu screen:
Brief description of the buttons
2 - Overview and monitoring of the system (all menus are "read-only!")
1 Node overview Node overview of all the E*LDS components in the system.
2 Case controllers Overview of all case controllers
3 Pack controllers Overview of all pack controllers
4 Receiver module wireless sensors Overview of all receiver modules and wireless sensors
5 Other LDS components Other components of the E*LDS system
6 EU archive EU archive
7 Signal inputs Status of the signal inputs of the system centre
8 Special inputs Status of the special inputs of the system centre
9 General information Currently has no function
10 Log Log of the installation
The two views can be alternated by swiping left / right or by tapping the left / right buttons.
To Next Page
Loading...
Need help?
General
