MINUTEMAN 320
5
REV 13.1:2020
• Bar diameter capacity: 3 mm to 27 mm (.118” to 1.062”)
• Automatic loading magazine — 10 linear inches of rack capacity
• Double pusher, space saving design
• Hydrodynamic support via high volume oil flow into channels.
• Polyurethane Quick Change guide channel — noise & vibration dampening
• Mitsubishi motion control — dependable and user friendly, allows easy bar feeder
parameter changes
• (1) Guide channel set to be chosen by customer. Several sizes to choose from, each
handling a specific stock range. See chart.
• (1) Standard front telescopic nose to match guide channel set (Swiss only)
• (1) O.D. bar stock collet (to be chosen by customer, specific collet needed for each stock
diameter)
• Automatic remnant retraction, self-centering gripper
• Synchronization device and Swiss lathe adaption kit
• Custom lathe cable and interface plugs
• Inboard Anti Vibration Device with rollers, block set available as option
• Mounted on the telescoping nose, Movable Anti Vibration Device with rollers, block set
available as option
To Next Page
