MINUTEMAN 320
25
REV 13.1:2020
3. Transportation and Handling
Warning The weight of the machine without packaging is
approximately 1300 lbs. Only trained operators are to use lifting equipment.
Verify the equipment to be used for moving the machine is rated to safely lift
the weight of the bar feeder plus the packaging material. Make special note
that the machine is top heavy and take proper precautions.
Model Machine Weight
MM-320-22 380 KG (837.7 lbs.)
MM-320-32 520 KG (1052.74 lbs.)
MM-320-37 600 KG (1322 lbs.)
MM-320-44 680 KG (1377 lbs.)
3.1 Unpacking The Bar Feeder
Lifting and moving the bar feeder by forklift is the preferred method of handling the machine.
The machine should be moved only by personnel qualified in the operation of forklifts. The forks
must extend past the machine cabinet, see the drawings below. Lift the machine from the side
opposite the magazine maintaining sufficient clearance from the forklift mast to avoid contact.
Care should be taken to keep the load balanced. Do not lift the machine any higher than
necessary.
Packaging of the Bar Feeder
The bar feeder will arrive in one of three ways:
A: Without packaging.
B: Attached to a skid or pallet.
C: Crated in a wooden box.
To Next Page
Loading...