Edwards SCU-350 Series

SCU-350 Series Control Unit for Turbomolecular Pump
MT-21E-201-E
Page 2
1
INTRODUCTION
1.2 Applied standards
The SCU-350 conforms to the following directives and standards:
1. Applied Directives
EC Low Voltage Directive
EC Electromagnetic Compatibility Directive
RoHS Directive *
* i.e. The product(s) contain less than - 0.1wt% for hexavalent chromium, lead, mercury, PBB and PBDE; 0.01wt% for
cadmium - in homogeneous materials (subject to the exemptions allowed by the Directive). This information relates only to
products sold on or after the date of this certificate. Edwards has taken all reasonable steps to confirm this statement,
which is based mainly on information from our suppliers. Whilst the RoHS Directive does not legally apply to this vacuum
equipment, we recognize that component compliance is relevant to many of our customers.
2. Applied Standards
EN61010-1 / IEC61010-1
EN61326 (class A)
EN55011 (class A)
EN50581
UL61010-1 (Electrical Equipment for Measurement, Control, and Laboratory Use)
3. Information about electromagnetic compatibility
This product is a class A product according to EN61326, and a group 1, class A product
according to EN55011.
This means that this product does not generate and/or use intentionally radio-frequency energy,
in the form of electromagnetic radiation, inductive and/or capacitive coupling, for the treatment of
material or inspection / analysis purpose and that it is suitable for use in all establishments other
than domestic and those directly connected to a low voltage power supply network which
supplies buildings used for domestic purposes.
This product may have potential difficulties in ensuring electromagnetic compatibility in other
than industrial environments, due to conducted as well as radiated disturbances.
This product must not be used in residential areas because it may cause interference if used in
residential areas.
4. REACH Regulation
Some components in this product contain Lead (Pb) which is in the REACH SVHC Candidate
List.