Edwards SCU-350 Series

SCU-350 Series Control Unit for Turbomolecular Pump
MT-21E-201-E
Page 29
3
INSTALLATION
3.10.3 Serial communication
SCU-350 is fitted with a remote communication port, "CON3" (optional accessory) (refer to Figure 23)
to allow remote input and output signal control by serial protocol. This connector is a D-Sub type (25
pins, socket). The screw for connector is M2.6.
Note: This D-Sub type connector is not supplied. Procure the connector for remote connection at
your company.
Figure 23 - CON3 connector (D-sub 25)
1
14
13
25