SCU-350 Series Control Unit for Turbomolecular Pump
MT-21E-201-E
Page 13
3
INSTALLATION
3 INSTALLATION
3.1 Unpacking
Check outer package for damage and that the delivery note corresponds to the purchase order. If the
STP control unit is damaged, contact Edwards or their distributor.
Note: It is recommended to keep the packaging materials, such as the corrugated fibreboard
container and cushioning material for possible re-use.
3.2 Front panel
1 START switch 7 ACCEL. LED
2 STOP switch 8 NORMAL LED
3 RESET switch 9 BRAKE LED
4 MANUAL/REMOTE changeover switch 10
POWER LED
5 SELECT switch 11
FAILURE LED
6 LCD panel 12
REMOTE LED
Figure 9 - SCU-350 front panel
Note: Refer to Table 2 for front panel functions.
1
2
4
3
5
6
8
9
10
12
11
7
To Next Page
Loading...
