EG4 LuxPowerTek 6000XP User Manual

26
7.3 ONLINE MONITORING SYSTEM USER INTERFACE
The customer needs to register a monitor account in the monitor system and set a Wi-Fi
password for the Wi-Fi dongle before using the EG4 monitor system. The monitoring system
may change due to updates, so you may find the following UI descriptions vary from the
current pages on the site. If you have any questions, or to create distributor or installer
accounts, please contact support@eg4electronics.com for assistance. See section 9 for
detailed instructions on how to access the EG4 Monitor APP, how to register an account, and
how to set a Wi-Fi password.
7.3.1 DASHBOARD (MONITOR TAB)
Once your account is created, log in and you will be brought to the main page (Monitor
tab) of the monitoring interface.

EG4 LuxPowerTek 6000XP Specifications

General

Category	Inverter
Rated Power	6000W
Max DC Input Power	7800W
Number of MPPT Trackers	2
Battery Voltage	48V
Max Charge/Discharge Current	120A
Protection Degree	IP65
Frequency	50/60Hz
Model	LuxPowerTek 6000XP
Communication	RS485
Operating Temperature Range	-25°C to 60°C
Protection Features	Over Voltage Protection, Over Temperature Protection
Cooling	Fan