EG4 LuxPowerTek 6000XP User Manual

30
Energy
Displays how key energy parameters have varied over time.
• Selecting ‘Month’ will show the energy statistics for each day.
• Selecting ‘Year’ will show energy for each month.
• Selecting ‘Total’ will show energy for each year.
Name
Description
E_pv1(kWh)
Energy generated by PV string 1
E_pv2(kWh)
Energy generated by PV string 2
E_inv(kWh)
Energy output via AC output
E_rec(kWh)
Energy of AC charge
E_charge(kWh)
Energy used for battery charge
E_discharge(kWh)
Energy output by battery
discharging
E_backupPower(kWh)
Load energy output
EnergyToGrid(kWh)
Feed-in energy
EnergyToUser(kWh)
Energy import from grid
Data History
Displays the measured technical characteristics of PV, battery, load, and grid for users or their
distributor's examination to promptly address any potential issues.
Advanced technical knowledge is necessary to properly comprehend this table. End users are
advised to concentrate solely on the "Monitor" view, "Chart" and "Energy" sections as these only
offer simple to comprehend performance data.
Helpful Tip:
Data can be exported to an Excel file to provide your distributor for technical support. Distributors
can then analyze the following factors in order to perform quick troubleshooting for their end users.

EG4 LuxPowerTek 6000XP Specifications

General

Category	Inverter
Rated Power	6000W
Max DC Input Power	7800W
Number of MPPT Trackers	2
Battery Voltage	48V
Max Charge/Discharge Current	120A
Protection Degree	IP65
Frequency	50/60Hz
Model	LuxPowerTek 6000XP
Communication	RS485
Operating Temperature Range	-25°C to 60°C
Protection Features	Over Voltage Protection, Over Temperature Protection
Cooling	Fan