E L A N H O M E S Y S T E M S
INSTALLATION MANUAL
Page 98 © ELAN Home Systems 2009 • All rights reserved.
S86A
PGD (Page Detect Query)
Description:
• Queries Unit u to determine if the Page Trigger In jack is active.
• If all zones in a chassis/system do NOT have PG enabled, this command will still return
the correct status of the Page Trigger In jack.
• PG enabled is programmed in VIA!TOOLS or ELANTOOLS S86 Init Screen Zones page.
• Works if System is off or on.
Command:
N/A
Query:
&S86,PGD,u?<cr>
Reply:
&S86,PGD,u,a<cr>
Parameters:
<cr>:
carriage return: Hexadecimal 0x0D or Decimal 13
u:
Unit 1-4
a:
0 = Off/Inactive
1 = On/Active
Examples:
• &S86,PGD,1?<cr> Queries Unit 1.
• &S86,PGD,1,0<cr> S86 Unit 1 reply. Page Trigger In jack is Off/Inactive.
To Next Page
Loading...
