Elan s86a - SRCNAM (Get Source Name); Restore Factory Defaults

E L A N H O M E S Y S T E M S
INSTALLATION MANUAL
© ELAN Home Systems 2009 • All rights reserved. Page 105
S86A
SRCNAM (Get Source Name)
Description:
• Replies the source, s, name stored in memory from VIA!TOOLS or ELANTOOLS called, abcdefghijklmno.
• Works if System is off or on.
Command:
N/A
Query:
&S86,SRCNAM,s?<cr>
Reply:
&S86,SRCNAM,s,abcdefghijklmno<cr>
Parameters:
<cr>:
carriage return: Hexadecimal 0x0D or Decimal 13
s:
Source: 1-8
abcdefghijklmno:
Name can be variable length of 14ASCII char maximum.
Examples:
• &S86,SRCNAM,1?<cr> Queries where Source 1’s Name. Useful for third party UI.
• &S86,SRCNAM,2,VIAdj<cr> Replies Source 2’s Name is VIAdj.
• &S86,SRCNAM,1,DVDR<cr> Replies Source 1’s Name is DVDR.
Restore Factory Defaults
Description:
• Resets system to factory default values.
• Works if System is off or on.
Command:
&S86,DEF<cr>