E L A N H O M E S Y S T E M S
INSTALLATION MANUAL
Page 48 © ELAN Home Systems 2009 • All rights reserved.
S86A
VIA!®QUAD 4-Channel Video Processor
The VIA!QUAD allows four video signals to be displayed simultaneously, sequentially, or independently. By connect-
ing the output of the VIA!QUAD to a single video input of the S86A, up to four cameras can be connected while only
using up one of the S86A’s Source Inputs. The video sources/cameras that are connected in this way can then be
switched and displayed on any TV, VIA! Touch Panel, or monitor that is connected to the system.
S86A
Figure 3-40: VIA!QUAD 4-Channel Video Processor
To Next Page
Loading...
