E L A N H O M E S Y S T E M S
INSTALLATION MANUAL
© ELAN Home Systems 2009 • All rights reserved. Page 101
S86A
VER (Firmware Version)
Description:
• Queries Unit u to determine firmware version.
• Works if System is off or on.
Command:
N/A
Query:
&S86,VER,u?<cr>
Reply:
&S86,VER,u,Firmware abcdefghijklmnop<cr>
Parameters:
<cr>:
carriage return: Hexadecimal 0x0D or Decimal 13
u:
Unit 1-4
abcdefghijklmnop:
Version can be variable length, 16 ASCII char maximum. Always begins with “&S86” even
if command sent used the common system header of “&ELAN”
Examples:
• &S86,VER,1?<cr> Queries Unit 1.
• &ELAN,VER,2?<cr> Queries Unit 2.
• &S86,VER,1,Firmware 2.0.1.9<cr> S86 Unit 1 reply.
• &S86,VER,2,Firmware 2.0.2.0<cr> S86 Unit 2 reply.
To Next Page
Loading...
