105
105EN
EPIR3 User Manual v1.3
Type Code
User Phone Number 8 7
User Phone Number 9 8
User Phone Number 10 9
User Code 1 10
User Code 2 11
User Code 3 12
User Code 4 13
User Code 5 14
User Code 6 15
User Code 7 16
User Code 8 17
User Code 9 18
User Code 10 19
KeyFob 1 54
KeyFob 2 55
KeyFob 3 56
KeyFob 4 57
KeyFob 5 58
Scheduler 70
Remote Code (EGR100) 71
7.11.2. Communication
The system supports the following communication methods and protocols:
• GPRS network – EGR100, Kronos protocol.
• Voice calls (GSM audio channel) – Ademco Contact ID protocol.
• CSD (Cricuit Switched Data).
• SMS – Cortex SMS format.
Any communication method can be set as primary or backup connection. The user can set up to 3 backup
connections in any sequence order.
Initially, the system communicates via primary connection with the monitoring station. By default, if the
initial attempt to transmit data is unsuccessful, the system will make additional attempts until the data is
successfully delivered. If all attempts are unsuccessful, the system will follow this pattern:
To Next Page
Loading...
