Eldes EPIR3 - Siren

95
95EN
EPIR3 User Manual v1.3
7.7. Siren
When the system is in alarm state, the siren will sound until the set time (By default – 1 minute) expires
or until the system is disarmed.
NOTE: Due to battery power saving reasons, the wireless siren will sound for 1 minute regardless of
the set alarm duration time, unless it is set to 0.
7.7.1. Bell Squawk
If enabled, the siren indicates the completed system arming and disarming process. After the system is
successfully armed, the siren/ bell will emit 2 short beeps and 1 long beep after the system is disarmed.
7.7.2. Indication by EWS2 Indicators
When enabled, the built-in LED indicators of EWS2 wireless outdoor siren will ash during the alarm.
7.7.3. Indication by EWS3 Indicators
When enabled, the built-in LED indicators of EWS3 wireless indoor siren will ash during the alarm. In the
event of burglary, 24-hour or tamper alarm, EWS3 will ash the blue LED indicators, while in case of a re
alarm, the device can ash the red LED indicator.